PDA

View Full Version : Neutral Start Switch


Nuke
04-14-2002, 02:38 PM
Advice needed again.

My reversing lights are intermittent, so today I decided to get the NSS off my AW4 tranny to clean it.

No luck. I took off the main nut and the smaller adjusting bolt, but the the switch body would not come off. Haynes says just "lift the switch off the shaft", but it won't lift off, even though I got a screwdriver behind it. It does swivel freely.

It is awkward beacause the exhaust pipe and an oil cooler pipe are in the way, but if I have to I will find a way of pulling it harder. Any ideas what could be holding it? Has anyone else found this problem? I know that plenty of others have done this job, usually at about 100,000 miles
.
So I have put it back together FTTB :(

LazyDaveD
04-15-2002, 09:36 PM
You just need to work it off, its stuck. Be careful not to break it though. I have the article about cleaning it scanned on my webshots account if you need it. Name is LazyDaveD on there also.

mdoffroad
12-13-2003, 01:40 PM
i need this artilce, onhow to clean one, help!!

trekker
12-13-2003, 05:14 PM
Hey,
Try this: http://www.jeepin.com/features/nss/
Hope this helps,
T
:)