Terra Sag...should I get a 3/4 Spacer

[ScottTJ]

I'm getting ready to install my s4t lift and I'm concerned about sag in the rear due to my 35" Spare and Younger Bros. Bumper Tire Carrier...(just a tad heavier than stock)....sooooo I was wondering if I should go ahead and throw the 3/4" spacer on while I'm doing the install...or should I wait and see how it turns out
Some say that Terra claims their lift is for "stock" jeeps...I'm guessing they mean stock bumper and spare...I don't know why the hell anyone w/a s4t would have a "stock" Jeep...Just wondering

[shlingdawg]

I would do it after the install to see if it is really necessary. When I got my rear bumper/carrier, it added over 350 lbs. to the rear. I added the spacers to level it out again. It only takes 30 minutes to add them and you don't need to do it when putting the bumper on.

[Lauti]

Scott,

I would wait, if the Teraflex coil springs really sag, then check if there's a fr & rr lift height difference, after that choose the proper coil spring spacers to get the Jeep sitting level again.
Although some say, that a leveled-out Jeep has to be fixed until it shows height differences at all four corners ;)